cosa-707-cosa-xentaur-vietnam-cosa-707-emissions-analyzer-cosa-xentaur-vietnam-may-phan-tich-khi-thai-cosa-707-cosa-xentaur-vietnam.png

COSA 707 Cosa+xentaur Vietnam, COSA 707 Emissions Analyzer Cosa+xentaur Vietnam, Máy phân tích khí thải COSA 707 Cosa+xentaur Vietnam

Nhà cung cấp: Pitesco

Hãng sản xuất: Cosa+xentaur

Liên hệ tư vấn

Mr Hà

ha@pitesco.com

0392.407.993

ha@pitesco.com

COSA 707 Cosa+xentaur Vietnam, COSA 707 Emissions Analyzer Cosa+xentaur Vietnam, Máy phân tích khí thải COSA 707 Cosa+xentaur Vietnam, đại lý chính hãng Cosa+xentaur Vietnam

 

The COSA 707 is an easy to hold, hand-held emissions analyzers capable of measuring up to seven different gases.

The emissions analyzer can be equipped with up to 6 electrochemical sensors and a CO2 IR-bench for simultaneous measurements. Cells can be installed for making measurements of low CO and low NO down to 0.1ppm.

The COSA 707 has a bright  3.5" TFT display with backlights and a zoom function. The unit can communicate through Bluetooth, USB or with a 2GB SD-Card.

New sensors for the COSA 707 include a CO2 sensor for a range of 0-20% (IR-Bench) and a H2S sensor for 0-500ppm (EC Sensor).

The 707 can make the following measurements:

O2 0 - 21%
CO2 (IR bench) 0 - 20%
CO2 (calculated value) 0 - 20%
CO low 0 - 300 ppm
CO/H2 Compensated 0 - 10,000 ppm
NO low 0 - 300 ppm
NO 0 - 5,000 ppm
NO2 0 - 1,000 ppm
NOx 0 - 5,000 ppm
SO2 0 - 5,000 ppm
H2S 0 - 500 ppm
CO high 0 - 2%
CO very high 0 - 10%
Combustion Air Temp. up to 100'C
Stack Gas Temp. up to 1,100'C *
Stack Draft Measurement +/- 100 hPa
Differential Pressure +/- 100 hPa
Differential Temp.

up to1,100'C *

* with adequate probe

The 707 can also make the following calculations:

Carbon Dioxide (CO2) 0 - 20%
Heat Losses (qA) 0 - 99.9%
Efficiency 0 - 120%
Air Ratio 1 - 9.99%
Excess Air 0 - 99.9%
Combustion Calculations

based on the large fuel

type list like:

CO2, excess air,

heat losses, combustion

efficiency, flue gas dew

point, CO/CO2 ratio
Emission Calculations

mg/Nm3,

NOx as mg/m3 NO2

true measurement of

NOx = NO + NO2,

including O2 referencing

(normalization) to user

settable value
CO Sensor Purge (option)

using 2nd pump,

for sensor protection

 

 

 
Features
  • Modern, slimline enclosure with fixing magnets
  • Super bright, color 3.5" TFT-display with LED backlight
  • Mini-USB for cable data transfer
  • IRDA interface for high speed IR printer
  • Integrated condensate trap with PTFE filter and LED backlight
  • Menu guided software and function keys
  • Robust stainless steel gas connectors
  • Re-chargeable Lithium-Ion battery for min. 15hrs, or NiMH for min. 6hrs operation
  • Less than 2lbs.