Motor Brakes, Encoders, and Options, Phanh động cơ, bộ mã hóa và tùy chọn Magnettek VietNam.
Nhà cung cấp: Pitesco
Hãng sản xuất: Magnettek
0392.407.993
Motor Brakes, Encoders, and Options, Phanh động cơ, bộ mã hóa và tùy chọn Magnettek VietNam.
Brakes
Features
- Manual release with automatic reset
- 3 through 25 lb.-ft. brakes are manually adjusted
- 35 lb.-ft and larger brakes are self adjusting to minimize maintenance
- Unitized construction for easy friction disc replacement
- Standard enclosure is drip-proof. Optional dust-tight and waterproof enclosures available.
- Simple two wire connection
- Class B coil insulation standard with Class H insulation available for use in higher ambient temperatures
- 230/460 volt, single phase, 60Hz coils are standard. 95 VDC coils with economizer circuit are optional.
Encoders
Features
- Rugged zero speed, magneto-resistive sensing technology
- Operating range -40 to +80 degree C
- 1024 PPR (pulses per revolution)
- Modular, non-contact, bearing-less design optimized for AC vector motor applications
- Unaffected by oil, grease, salt water, dust or other common contaminants
Max Guard Insulation System
The MAX GUARD insulation system combines corona resistant magnet wire and a unique low stress winding configuration, to deliver long dependable motor life under the stresses of IGBT-based variable frequency drive operation. MAX GUARD surpasses the requirements of NEMA MG1, Part 31, and is standard on BLUE MAX®and BLACK MAX® motors.
Severe duty service treatment
The severe duty service option is recommended for particularly dirty or caustic environments, or where the motor is subject to wash down as part of normal maintenance. Available on BLUE MAX motors, this treatment includes the following:
- All cast iron construction, including fan covers if supplied
- External and internal surfaces treated with corrosion resistant epoxy paint
- Lead separator between frame and conduit box; Diagonally split, gasketed,
- 4 position, NPT threaded conduit box
- Corrosion resistant brass UL approved drain and breather
- Hardware is zinc electrolytic
- coated with zinc dichromate dip
