Variable Area Flowmeter for monitoring gas burners UTS, Lưu lượng kế diện tích biến thiên để theo dõi đầu đốt gas UTS, Kobold VietNam.
Nhà cung cấp: Pitesco
Hãng sản xuất: Kobold
0392.407.993
Variable Area Flowmeter for monitoring gas burners UTS, Lưu lượng kế diện tích biến thiên để theo dõi đầu đốt gas UTS, Kobold VietNam.
Variable Area Flowmeter for monitoring gas burners UTS
For monitoring of gas burners
Measuring range: 10 - 100 Nl/h … 0.3 - 3 Nm³/h air
Connection: M18x1.5
Material: brass, stainless steel
pmax: 3 bar
tmax: 65°C
Accuracy: ±2.5 ... 4 % of full scale
Datasheet
Description
The Kobold flowmeter model UTS works on the basis of the suspended float principle. It comes with a M 18 x 1.5 connection. The inflow of the medium is via 4 mm hole within this connection, whereas the outflow happens via six holes which are concentrically positioned around the inlet hole. This special connection is specifically made for UTS and provided with a special seal.
This flowmeter can be optionally supplied with a special adapter G ¼ or ¼" NPT for horizontal installation. The use of this adapter is always recommended because of its special design. Especially in tight places, where conventional devices do not fit best because of their size, the UTS is an automatic choice.
The device is suitable for monitoring gas burners (e. g. oxygen, hydrogen, methane, inert gases e.g. MIG welding) due to its low price and possibility of an easy measuring tube exchange. The armature is made of nickel plated brass or stainless steel with impact resistant polystyrene protection bulb.
