dong-ho-do-luu-luong-nhiet-cho-khi-el-flow-select-f-110c-bronkhorst-vietnam.png

Đồng hồ đo lưu lượng nhiệt cho khí EL-FLOW SELECT F-110C Bronkhorst Vietnam, đại lý Bronkhorst Vietnam

 

EL-FLOW SELECT F-110C

Digital Thermal Mass Flow Meter for Gases

  • Lowest gas flow rates
  • Compact design, small internal volume
  • High accuracy
  • Virtually pressure and temperature independent

Technical specifications

Measurement / control system
Flow range, based on N2
(intermediate ranges available)
min. 0,014…0,7 mln/min
max. 0,6…9 mln/min

Accuracy (incl. linearity)
(based on actual calibration)

±0,8% Rd plus ±0,2% FS for F-110C-005;
±2% FS for F-110C-002
Turndown 1:50 (in digital mode up to 1:187,5)
Multi fluid capability

storage of max. 8 calibration curves;
optional Multi Gas / Multi Range functionality up to 10 bar abs

Repeatability < 0,2% Rd

Response time

FS < 3 mln/min: 2 sec;
FS > 3 mln/min: 1…2 sec
Operating temperature -10…+70°C
Temperature sensitivity zero: < 0,05% FS/°C; span: < 0,05% Rd/°C
Pressure sensitivity 0,1% Rd/bar typical N2; 0,01% Rd/bar typical H2
Leak integrity, outboard tested < 2 x 10-9 mbar l/s He
Attitude sensitivity max. error at 90° off horizontal 0,2% FS at 1 bar, typical N2
Warm-up time 30 min. for optimum accuracy
2 min for accuracy ± 2% FS
Mechanical parts
Material (wetted parts) stainless steel 316L or comparable
Pressure rating 100 bar abs
Process connections compression type or face seal couplings
Seals standard: Viton®; options: EPDM, Kalrez® (FFKM)
Weight 0,4 kg
Ingress protection (housing) IP40
Electrical connection
Analog/RS232 9-pin D-connector (male);
PROFIBUS DP bus: 9-pin D-connector (female);
power: 9-pin D-connector (male);
Devicenet™ 5-pin M12-connector (male);
EtherCAT®/ PROFINET 2 x RJ45 modular jack (in/out)
FLOW-BUS/Modbus-RTU/ASCII RJ45 modular jack