EP10116 Pneumatic amplifie Njetc, Njetc Việt Nam, Njetc VietNam, Njetc vietnam, Đại lý Njetc tại VietNam
Nhà cung cấp: pites
Hãng sản xuất: Njetc
0392.407.993
Piezo valve work as the pilot of EP10116/10124 pneumatic amplifier, E/P achieve electrical signals to pressure conversion. It work at switch mode. Robust design of high integration, has the features of faster reponse, energy-saving, high frequency operation. Ultra low consumption based on piezoelectric technology, It has advantages for intrinsically safe product design.
The pipelines of in-out are lead to EP bottom separately, pilot supply, pilot exhaust, main exhaust, reference pressure, users can easily design Ex-proof unit to insulate the air pipelines away electric chamber.
The way of pilot supply and exhaust are guided specially related to main supply and exhaust, it caused little lower pressure than normal when a large number compress air in-out through main pipelines, this lower pressure should bring some water or dust away from piezo valve and reduce adverse influence to pilot.
The way of pilot supply and exhaust are guided specially related to main supply and exhaust, it caused little lower pressure than normal when a large number compress air in-out through main pipelines, this lower pressure should bring some water or dust away from piezo valve and reduce adverse influence to pilot.
 |
EP10116 Single acting/Fail safe Actuator open or close tightly when Power off or no compressed air Order No： EP10116 |
||||||||
| PV1 | PV2 | P1 | P2 | Actuator | |||||
| ON | ON | In | Out | Open | |||||
| ON | OFF | Invalid Operation | |||||||
| OFF | ON | Hold | Hold | Hold | |||||
| OFF | OFF | Out | In | Close | |||||
 |
|||||||||
| EP10124 Double acting/Fail safe Actuator open or close tightly when Power off or no compressed air Order No： EP10124 |
 |
||||||||
| PV1 | PV2 | P1 | P2 | Actuator | |||||
| ON | ON | In | Out | Open | |||||
| ON | OFF | Invalid Operation | |||||||
| OFF | ON | Hold | Hold | Hold | |||||
| OFF | OFF | Out | In | Close | |||||
 |
|||||||||
 |
EP10126 Single & Double acting/Fail in place Actuator hold in the original position when Power off or no compressed air Order No： EP10126 on request |
||||||||
| PV1 | PV2 | P1 | P2 | Actuator | |||||
| ON | ON | Invalid Operation | |||||||
| ON | OFF | In | Out | Close | |||||
| OFF | ON | Out | In | Open | |||||
| OFF | OFF | Hold | Hold | Hold | |||||
 |
|||||||||
| EP10116/EP10124/EP10126 Pneumatic Amplifier |  |
||||
| Parameter | Sysmbol | Unit | Description | ||
| General Features | |||||
| System | Piezo valve as pilot | ||||
| Housing | Plastic | ||||
| Mounting | See drawing | ||||
| Pneumatic connection | (All same) | ||||
| Dimension | LxWxH | mm | 68*46*53 | ||
| Weight | g | 190 | |||
| Pneumatic Characteristics | |||||
| Supply pressure | Min/Max | bar | 1.4-7.0 | ||
| Flow | Qn | l/min | 130@6bar | ||
| Medium | Filtered air @30µM | ||||
| no or minimal oil | |||||
| (max 30mg/m³) | |||||
| Electrical Characteristics | |||||
| Operationg voltage | VDC | 24 | |||
| Capacity | C | nF | <100 | ||
| Switching current | Id | µA | 10 | ||
| Holding current | Id | µA | 0 | ||
| PWM control | % | 12-80mS | |||
| Switching time | ms | On :<20@10% discharge | |||
| ms | OFF:<20@90% discharge | ||||
| Temperature range | Min/Max | ℃ | -30 to +60 | ||
| Fail in Place (Hold：without signal，air，electric) | |||||
| Hold time at 25% | T | h | >0.5 (Drop to 15%) | ||
| Hold time at 50% | T | h | >0.5 (Drop to 40%) | ||
| Hold time at 75% | T | h | >0.5 (Drop to 65%) | ||
| * Actual value see test report |
|||||
| Test Condition | Linear actuator | ||||
| mm | Travel:25 | ||||
| bar | Spring:0.4-2.0 | ||||
