EP10126 Pneumatic amplifie Njetc, Njetc Việt Nam, Njetc VietNam, Njetc vietnam, Đại lý Njetc tại VietNam
Nhà cung cấp: pites
Hãng sản xuất: Njetc
0392.407.993
| EP10126 Single & Double acting/Fail in place Actuator hold in the original position when Power off or no compressed air Order No： EP10126 on request |
||||
| PV1 | PV2 | P1 | P2 | Actuator |
| ON | ON | Invalid Operation | ||
| ON | OFF | In | Out | Close |
| OFF | ON | Out | In | Open |
| OFF | OFF | Hold | Hold | Hold |
 |
||||
| EP10116/EP10124/EP10126 Pneumatic Amplifier |  |
||||
| Parameter | Sysmbol | Unit | Description | ||
| General Features | |||||
| System | Piezo valve as pilot | ||||
| Housing | Plastic | ||||
| Mounting | See drawing | ||||
| Pneumatic connection | (All same) | ||||
| Dimension | LxWxH | mm | 68*46*53 | ||
| Weight | g | 190 | |||
| Pneumatic Characteristics | |||||
| Supply pressure | Min/Max | bar | 1.4-7.0 | ||
| Flow | Qn | l/min | 130@6bar | ||
| Medium | Filtered air @30µM | ||||
| no or minimal oil | |||||
| (max 30mg/m³) | |||||
| Electrical Characteristics | |||||
| Operationg voltage | VDC | 24 | |||
| Capacity | C | nF | <100 | ||
| Switching current | Id | µA | 10 | ||
| Holding current | Id | µA | 0 | ||
| PWM control | % | 12-80mS | |||
| Switching time | ms | On :<20@10% discharge | |||
| ms | OFF:<20@90% discharge | ||||
| Temperature range | Min/Max | ℃ | -30 to +60 | ||
| Fail in Place (Hold：without signal，air，electric) | |||||
| Hold time at 25% | T | h | >0.5 (Drop to 15%) | ||
| Hold time at 50% | T | h | >0.5 (Drop to 40%) | ||
| Hold time at 75% | T | h | >0.5 (Drop to 65%) | ||
| * Actual value see test report |
|||||
| Test Condition | Linear actuator | ||||
| mm | Travel:25 | ||||
| bar | Spring:0.4-2.0 | ||||
